This equipment is mainly used for shot blasting of structural parts, deburring of die-casting parts and homogenization or hardening of dynamically stressed parts. The hook shot blasting machine is divided into single hook and double hook. The hook shot blasting machine is alternately entered into the shot blasting chamber by the two hooks loading the workpiece. Use a blast wheel to throw 0.1 ~ 1.5mm abrasives on the surface of the workpiece, so that the surface of the workpiece reaches a certain roughness, make the workpiece beautiful, or change the compressive stress of the workpiece to increase the service life. This model is widely used in gear, gear shaft, forging, casting, construction, chemical, motor, machine tool and other industries to clean or strengthen the surface of small and medium-sized castings and forgings, such as descaling, burrs, sand castings, etc. And this model is suitable for cleaning of slender, thin-walled parts that are not suitable for collision. Hook type shot blasting machine is the standard model of shot blasting machine. The rotating diameter of the shot blasting chamber is from 500 to 3000 mm, and the height is from 600 to 3000 mm. This shot blasting machine has a very high production efficiency and a wide range of flexibility. It is an ideal cleaning and strengthening equipment and is easy to operate. You only need to load the workpiece to be processed with a hook, press the start button, in a short time (usually 5-7 minutes), the entire cleaning process is completed, all dust and residual shots are removed, and it is mainly suitable for the surface treatment of various medium and large castings, forgings, weldments, and heat treatment parts , Including fragile and irregularly shaped workpieces.